Solar panels are manufactured out of photovoltaic cells that transform solar energy into electricity. Although solar panel installation may seem a bit difficult, it is simpler if you know the right steps. So here are some essential steps for solar panel installation.
Examine Your Electricity Bill
At the initial stage, you need to analyze your electricity bill properly. When you observe your electricity bills, you will get a clear idea about the monthly consumption. Depending on the consumption, it will be easier to decide the size of the solar panels according to the requirements of the consumption. The average needs to be calculated for the past 12 months to get the accurate value of the average monthly consumption.
Select the Installation Company and the Model of the Panel
You should select the company that will install solar panels on the roof. You should know the available options of different models of panels that may vary depending on the objective of the consumer. Varying with the requirements, you need to select the company and according to their selection, the best solution will be chosen for the project. As different solutions work differently, the structure can also be customized according to your suitable environment. The West Bay Energy of Tampa will help you in guiding which model will be the best for your residential electricity need.
Study of Feasibility
Before you go for the installation, you should perform a feasibility study. Depending on the profile of the consumption and the building structure, the assessment takes place with the ideal type of equipment. You should consider the number of people who will use the electricity and the type of electrical appliance that is used before installing the panels. To get professional help, you should visit
Depending on your monthly consumption, you should simulate the cost of installing solar panels on your roof. Calculating the average cost will be possible as you know the average electricity consumption. You should know the warranty, the maintenance cost, and the total number of panels required for the process of installation.
As soon as you know the budget and the required panels, you should estimate the conditions of the electrical network that is available in your building. The electric consumption should follow the system off-grid and on-grid.
Grants and Permits
When all the previous steps have been followed properly, you should request the grants and the permits. There should be a subsidy from the Government for installing solar panels in your residence.
It is a very important step before installing solar panels. The orientation should be proper with the Sun and the site should also be present at a good height to receive the maximum amount of sunlight.
When all the above steps are completed, the installation of solar panels becomes easier. Solar panels are not suitable only for residential buildings, but also for commercial buildings. When you are doubtful about installing through the DIY route, you should call a professional for installing the solar panels for your convenience.